Jump to content


Photo

Problem getting to AR4300 in BGT


  • Please log in to reply
5 replies to this topic

#1 hook71

hook71
  • Member
  • 280 posts

Posted 01 August 2010 - 08:49 AM

I couldn't get AR4300 (Cloudpeak Mountains) to appear on the Worldmap from any of the adjoining areas in BGT. Had to CLUAConsole:MoveToArea("AR4300") to get it to appear. I'm playing with the smaller of the two worldmaps. Tried reinstalling the Worldmap but that made no difference. Something iffy in my installation or a more general problem?

Attached File  WeiDU.log   12.98K   256 downloads

#2 Turambar

Turambar
  • Modder
  • 935 posts

Posted 01 August 2010 - 09:09 AM

I couldn't get AR4300 (Cloudpeak Mountains) to appear on the Worldmap from any of the adjoining areas in BGT. Had to CLUAConsole:MoveToArea("AR4300") to get it to appear. I'm playing with the smaller of the two worldmaps. Tried reinstalling the Worldmap but that made no difference. Something iffy in my installation or a more general problem?

Attached File  WeiDU.log   12.98K   256 downloads


What areas do you mean by "adjoining areas"? maybe the worldmap moved it somewhere else.
have you tried, for example, to leave the adjoining areas from another side, or to reach it from another area which should not be adjoining? for example, have you tried reaching it from nashkel mines, west?

try to change-log nashkel, nashkel mines, and the third area near there, so we can see what could have changed them

Edited by Turambar, 01 August 2010 - 09:13 AM.

Turambar

Currently supporting: DSotSC for BGT, NTotSC - forum

Turambar's fixes and tweaks for BG2, BGT, DSotSC, NTotSC, SoBH and more!

 

Before posting questions (even regarding posts written by myself), please look at Jarno Mikkola's FAQs for the Megamods!
(how to correctly report CTDs)

 


vipersig.jpg


#3 hook71

hook71
  • Member
  • 280 posts

Posted 01 August 2010 - 10:17 AM

Most strange. It worked fine getting the area to appear going west from Naskhkel mines (something I never tried before because I hadn't visited that area yet). Upon reloading my save game it worked fine getting the area to appear going east from Western Cloudpeaks as well, something I had tried several times before. Thanks for the help! I am a bit confused by this however (maybe it was a problem in the Quicksave I used when I originally had this problem?).

#4 Turambar

Turambar
  • Modder
  • 935 posts

Posted 02 August 2010 - 04:45 AM

Most strange. It worked fine getting the area to appear going west from Naskhkel mines (something I never tried before because I hadn't visited that area yet). Upon reloading my save game it worked fine getting the area to appear going east from Western Cloudpeaks as well, something I had tried several times before. Thanks for the help! I am a bit confused by this however (maybe it was a problem in the Quicksave I used when I originally had this problem?).


I think I got the same issue then. I actually didn't worry much but I think I also had to reach it from nashkell mines. I'll check my own game, anyway. Could you upload and change-log your nashkell and cloudpeaks .are file?

Do you have the revised travel times on your worldmap? maybe, that is the issue.

Another similar (but opposite) problem I met was that the cloakwood mines appeared when I exited the ankheg farm from the west side; could you check if that happens to you as well?

I don't know where the information about adiacent areas is stored, anyway; that could be useful...

Edited by Turambar, 02 August 2010 - 05:01 AM.

Turambar

Currently supporting: DSotSC for BGT, NTotSC - forum

Turambar's fixes and tweaks for BG2, BGT, DSotSC, NTotSC, SoBH and more!

 

Before posting questions (even regarding posts written by myself), please look at Jarno Mikkola's FAQs for the Megamods!
(how to correctly report CTDs)

 


vipersig.jpg


#5 hook71

hook71
  • Member
  • 280 posts

Posted 02 August 2010 - 10:45 AM


Most strange. It worked fine getting the area to appear going west from Naskhkel mines (something I never tried before because I hadn't visited that area yet). Upon reloading my save game it worked fine getting the area to appear going east from Western Cloudpeaks as well, something I had tried several times before. Thanks for the help! I am a bit confused by this however (maybe it was a problem in the Quicksave I used when I originally had this problem?).


I think I got the same issue then. I actually didn't worry much but I think I also had to reach it from nashkell mines. I'll check my own game, anyway. Could you upload and change-log your nashkell and cloudpeaks .are file?

Do you have the revised travel times on your worldmap? maybe, that is the issue.

Another similar (but opposite) problem I met was that the cloakwood mines appeared when I exited the ankheg farm from the west side; could you check if that happens to you as well?

I don't know where the information about adiacent areas is stored, anyway; that could be useful...


Yepp, I am pretty sure I installed "Revised Travel Times and Area visibility".

Enclosed are the change-log and area files. Hope I did it correctly (new thing for me).

Attached File  AR4200.ARE   13.48K   254 downloads
Attached File  change-log AR4200.txt   731bytes   276 downloads
Attached File  AR4300.ARE   14.14K   198 downloads
Attached File  change-log AR4300.txt   731bytes   271 downloads
Attached File  AR4400.ARE   8.86K   231 downloads
Attached File  change-log AR4400.txt   601bytes   276 downloads

For reference AR4200 is Western Cloudpeaks and AR4400 is Nashkel Mines Exterior.

Regarding Cloakwood Mines I can get it to appear prematurely if I go south from AR7900 - Wyrm's Crossing (but not West from AR8300 - Ankheg Farms)

Attached File  AR7900.ARE   17.38K   210 downloads
Attached File  change-log AR7900.txt   557bytes   242 downloads

#6 Turambar

Turambar
  • Modder
  • 935 posts

Posted 02 August 2010 - 11:22 PM

I don't think this is a major problem, but I'll take a look, anyway, it must be the same as mine.

Thank you for all files, I'll look at those and mine and see if I understand something.

Turambar

Currently supporting: DSotSC for BGT, NTotSC - forum

Turambar's fixes and tweaks for BG2, BGT, DSotSC, NTotSC, SoBH and more!

 

Before posting questions (even regarding posts written by myself), please look at Jarno Mikkola's FAQs for the Megamods!
(how to correctly report CTDs)

 


vipersig.jpg